PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12Z7003-6020
12Z7003-6020 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: ALUMINUM BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-196-2676, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12Z7003-6020
NSN: 5340-00-196-2676
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialALUMINUM BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.766 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.578 INCHES NOMINAL IN
NSN5340-00-196-2676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12Z7003-6020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.766 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.578 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.173 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.766 INCHES NOMINAL IN
MATERIALALUMINUM BAND
MATERIALRUBBER CUSHION
MATERIALRUBBER CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2620-912PC6 3-4INInterchangeable
interchangeable cross-reference
interchangeable
45-10-07Interchangeable
interchangeable cross-reference
interchangeable
45-10-07-63Interchangeable
interchangeable cross-reference
interchangeable
NB-3160 451007Interchangeable
interchangeable cross-reference
interchangeable
45-1006Interchangeable
interchangeable cross-reference
interchangeable
214MS027P008Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12Z7003-6020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12Z7003-6020?
12Z7003-6020 is a CLAMP,LOOP.
What parts can replace 12Z7003-6020?
There are 10 known substitutes for 12Z7003-6020: 2620-912PC6 3-4IN, 45-10-07, 45-10-07-63 and 7 more. Substitute compatibility should be verified for your specific system.
Is 12Z7003-6020 still available?
12Z7003-6020 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12Z7003-6020

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026