PartsTable
Technical Data Sheet
Download PDF

12Z50PC350 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

12Z50PC350: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL, point_style: CUP, thread_class: 3A A, thread_length: 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-013-9193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12Z50PC350
NSN: 5305-00-013-9193
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
point_styleCUP
thread_class3A A
thread_length0.625 INCHES MAXIMUM IN
fastener_length0.625 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_across_flats0.312 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-013-9193
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 12Z50PC350 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES MAXIMUM IN
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: CUP
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES MAXIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD DIRECTIONRIGHT-HAND
POINT STYLECUP
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4 STYLE
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 2
FFS103TYPE3STYLE4Reference document
Same NSN cross-reference
Reference document — Identification reference
139193Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 12Z50PC350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12Z50PC350?
12Z50PC350 is a SETSCREW.
What parts can replace 12Z50PC350?
There are 2 known substitutes for 12Z50PC350: FFS103TYPE3STYLE4, 139193. Substitute compatibility should be verified for your specific system.
What is the NSN for 12Z50PC350?
12Z50PC350 is cataloged in the U.S. Government catalog under NSN 5305-00-013-9193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12Z50PC350