PartsTable / COMPONENT / 12Z12124-2
12Z12124-2
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.625 INCHES NOMINAL IN, overall_length: 0.719 INCHES NOMINAL IN, end_pressure_rating: 5.000 POUNDS NOMINAL LBS, nominal_thread_size: 0.164 INCHES IN, thread_quantity_per_inch: 32. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-527-9913, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12Z12124-2
NSN: 5340-00-527-9913 FSC: 5340 CAGE: 94135 — NAVAL ORDNANCE STANDARDS (USA)
SPECIFICATIONS
shape ROUND thread_length 0.625 INCHES NOMINAL IN overall_length 0.719 INCHES NOMINAL IN end_pressure_rating 5.000 POUNDS NOMINAL LBS nominal_thread_size 0.164 INCHES IN thread_quantity_per_inch 32 thread_series_designator UNIFIED NATIONAL COARSE (UNC) NSN 5340-00-527-9913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 12Z12124-2
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• END PRESSURE RATING: 5.000 POUNDS NOMINAL LBS
• THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
• NOMINAL THREAD SIZE: 0.164 INCHES IN
• THREAD QUANTITY PER INCH: 32
• THREAD LENGTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END PRESSURE RATING 5.000 POUNDS NOMINAL LBS THREAD SERIES DESIGNATOR UNIFIED NATIONAL COARSE (UNC) NOMINAL THREAD SIZE 0.164 INCHES IN OVERALL LENGTH 0.719 INCHES NOMINAL IN SHAPE ROUND THREAD QUANTITY PER INCH 32 THREAD LENGTH 0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
S50 Upgraded Successor successor cross-reference
successor
6275RA Upgraded Successor successor cross-reference
successor
043RA Upgraded Successor successor cross-reference
successor
SAE-J512 Interchangeable interchangeable cross-reference
interchangeable
6240001557856 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 12Z12124-2?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12Z12124-2?
12Z12124-2 is a PLUNGER,QUICK RELEASE.
What parts can replace 12Z12124-2?
There are 20 known substitutes for 12Z12124-2: S50, 6275RA, 043RA and 17 more. Substitute compatibility should be verified for your specific system.
Is 12Z12124-2 still available?
12Z12124-2 is currently cancelled.
Request a Quote — 12Z12124-2