PartsTable
Technical Data Sheet
Download PDF

12Z10413-20 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

12Z10413-20: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, alignment_type: RIGID, overall_height: 0.7060 INCHES MINIMUM AND 0.7090 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 2.5585 INCHES MINIMUM AND 2.5591 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-620-6784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12Z10413-20
NSN: 3110-00-620-6784
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL WASHER
alignment_typeRIGID
overall_height0.7060 INCHES MINIMUM AND 0.7090 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter2.5585 INCHES MINIMUM AND 2.5591 INCHES MAXIMUM IN
overall_outside_diameter3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-620-6784
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 12Z10413-20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 2.5585 INCHES MINIMUM AND 2.5591 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.7060 INCHES MINIMUM AND 0.7090 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER2.5585 INCHES MINIMUM AND 2.5591 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL BALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12Z10413-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12Z10413-20?
12Z10413-20 is a BEARING,BALL,THRUST.
What is the NSN for 12Z10413-20?
12Z10413-20 is cataloged in the U.S. Government catalog under NSN 3110-00-620-6784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12Z10413-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.