The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_style: ROUND W/ OUT BOLT HOLES FIRST END, connection_type: PLAIN FACE FLANGE FIRST END, inside_diameter: 0.750 INCHES NOMINAL IN, connection_style: PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END. This part is cataloged in the U.S.
Government catalog under NSN 4720-00-620-5662, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12C12SF90
NSN:4720-00-620-5662 FSC:4720 — Hose and Flexible Tubing CAGE:70434 — ANCHOR SWAN CORP SUB OF AMERACE CORP (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_style
ROUND W/ OUT BOLT HOLES FIRST END
connection_type
PLAIN FACE FLANGE FIRST END
inside_diameter
0.750 INCHES NOMINAL IN
connection_style
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END
outside_diameter
1.250 INCHES NOMINAL IN
operating_pressure
2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
9000.0 POUNDS PER SQUARE INCH LBS
end_connection_design
ELBOW FIRST END
end_flange_construction
SOLID FIRST END
flange_outside_diameter
1.500 INCHES NOMINAL FIRST END IN
NSN
4720-00-620-5662
COMPONENT DIAGRAM
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES FIRST END
•
MEASURING METHOD AND LENGTH: 12.500 INCHES NOMINAL WORKING IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
CONNECTION STYLE: PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END
•
FLANGE OUTSIDE DIAMETER: 1.500 INCHES NOMINAL FIRST END IN
•
END CONNECTION DESIGN: ELBOW FIRST END
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD
TECHNICAL CHARACTERISTICS
FLOW ANGLE
90.0 DEGREES FIRST END
MEASURING METHOD AND LENGTH
12.500 INCHES NOMINAL WORKING IN
TEMP RATING
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS
9.500 INCHES IN
CONNECTION STYLE
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END
FLANGE OUTSIDE DIAMETER
1.500 INCHES NOMINAL FIRST END IN
END CONNECTION DESIGN
ELBOW FIRST END
LAYER COMPOSITION AND LOCATION
OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG
0.0
CONNECTION TYPE
PLAIN FACE FLANGE FIRST END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12C12SF90?
12C12SF90 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 12C12SF90?
There are 2 known substitutes for 12C12SF90: 12C12SF90-90DEG12-1-2, 2D3273. Substitute compatibility should be verified for your specific system.
What is the NSN for 12C12SF90?
12C12SF90 is cataloged in the U.S. Government catalog under NSN 4720-00-620-5662. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.