12A51C13508-2 — BELL CRANK

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

12A51C13508-2: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, bore_length: 0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN, bore_diameter: 1.123 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, special_features: LIFT HAND APPLICATION, style_designator: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS, fsc_application_data: FLIGHT CONTROL,AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-421-8027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

12A51C13508-2

NSN: 3040-00-421-8027
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY
bore_length	0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
bore_diameter	1.123 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
special_features	LIFT HAND APPLICATION
style_designator	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
fsc_application_data	FLIGHT CONTROL,AIRCRAFT
end_hole/ball_diameter	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball	3.000 INCHES NOMINAL SECOND END IN
NSN	3040-00-421-8027

COMPONENT DIAGRAM

KEY FEATURES

•

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 3.000 INCHES NOMINAL SECOND END IN

•

END HOLE/BALL DIAMETER: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SECOND END IN

•

FSC APPLICATION DATA: FLIGHT CONTROL,AIRCRAFT

•

BORE LENGTH: 0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS

TECHNICAL CHARACTERISTICS

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	3.000 INCHES NOMINAL SECOND END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.261 INCHES NOMINAL FIRST END IN
END HOLE/BALL DIAMETER	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST END IN
FSC APPLICATION DATA	FLIGHT CONTROL,AIRCRAFT
BORE LENGTH	0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
STYLE DESIGNATOR	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
SPECIAL FEATURES	LIFT HAND APPLICATION
BORE DIAMETER	1.123 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
MATERIAL	ALUMINUM ALLOY

OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224

SUBSTITUTES & CROSS-REFERENCES 1

A51C13508-2Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementDemilitarization required — mutilation

Ready to buy 12A51C13508-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 12A51C13508-2?

12A51C13508-2 is a BELL CRANK.

What parts can replace 12A51C13508-2?

There is 1 known substitute for 12A51C13508-2: A51C13508-2. Substitute compatibility should be verified for your specific system.

What is the NSN for 12A51C13508-2?

12A51C13508-2 is cataloged in the U.S. Government catalog under NSN 3040-00-421-8027. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

12A51C13508-2 — BELL CRANK

Request a Quote — 12A51C13508-2