PartsTable
Technical Data Sheet
Download PDF

12987521 — BRACKET ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12987521: BRACKET ASSEMBLY.

The BRACKET ASSEMBLY is a the manufacturer industrial component. Key specifications include material: ALUMINUM AND STEEL, overall_width: 2.120 INCHES NOMINAL IN, overall_height: 8.000 INCHES NOMINAL IN, overall_length: 10.500 INCHES NOMINAL IN, end_item_identification: FIGHTING VEHICLE SYSTEMS, BRADLEY (BFVS); 2350014059886, accessory_components_and_quantity: BRACKET 1, PIVOT 1, HINGE 1, TORQUE LIMITER 1, SCREWS 3, SET SCREW 1, WASHERS 2. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-5300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12987521
NSN: 5340-01-500-5300
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialALUMINUM AND STEEL
overall_width2.120 INCHES NOMINAL IN
overall_height8.000 INCHES NOMINAL IN
overall_length10.500 INCHES NOMINAL IN
end_item_identificationFIGHTING VEHICLE SYSTEMS, BRADLEY (BFVS); 2350014059886
accessory_components_and_quantityBRACKET 1, PIVOT 1, HINGE 1, TORQUE LIMITER 1, SCREWS 3, SET SCREW 1, WASHERS 2
part_name_assigned_by_controlling_agencyBRACKET ASSEMBLY, COMMANDER'S DISPLAY
NSN5340-01-500-5300
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12987521 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCESSORY COMPONENTS AND QUANTITY: BRACKET 1, PIVOT 1, HINGE 1, TORQUE LIMITER 1, SCREWS 3, SET SCREW 1, WASHERS 2
•
MATERIAL: ALUMINUM AND STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT8.000 INCHES NOMINAL IN
OVERALL LENGTH10.500 INCHES NOMINAL IN
OVERALL WIDTH2.120 INCHES NOMINAL IN
ACCESSORY COMPONENTS AND QUANTITYBRACKET 1, PIVOT 1, HINGE 1, TORQUE LIMITER 1, SCREWS 3, SET SCREW 1, WASHERS 2
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET ASSEMBLY, COMMANDER'S DISPLAY
END ITEM IDENTIFICATIONFIGHTING VEHICLE SYSTEMS, BRADLEY (BFVS); 2350014059886
MATERIALALUMINUM AND STEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12987521?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12987521?
12987521 is a BRACKET ASSEMBLY.
What is the NSN for 12987521?
12987521 is cataloged in the U.S. Government catalog under NSN 5340-01-500-5300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12987521