PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1298-00-0-01-FIND 1
1298-00-0-01-FIND 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NEOPRENE BACKING, outside_diameter: 1.250 INCHES NOMINAL IN, special_features: INSIDE DIAMETER IS 0.625 INCHES (NOM) IN, end_item_identification: UNIT REFER SH, part_name_assigned_by_controlling_agency: ASKET, HOLLOW, LOW-TEMP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-701-2128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1298-00-0-01-FIND 1
NSN: 5330-01-701-2128
FSC: 5330
CAGE: 38450 — ENGINEERED COIL COMPANY DBA ENGINEERED COIL CO DIV DRS MARLO COIL (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE BACKING
outside_diameter1.250 INCHES NOMINAL IN
special_featuresINSIDE DIAMETER IS 0.625 INCHES (NOM) IN
end_item_identificationUNIT REFER SH
part_name_assigned_by_controlling_agencyASKET, HOLLOW, LOW-TEMP
NSN5330-01-701-2128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1298-00-0-01-FIND 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER NEOPRENE BACKING
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESINSIDE DIAMETER IS 0.625 INCHES (NOM) IN
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUNIT REFER SH
PART NAME ASSIGNED BY CONTROLLING AGENCYASKET, HOLLOW, LOW-TEMP
MATERIALRUBBER NEOPRENE BACKING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
512046Interchangeable
interchangeable cross-reference
interchangeable
3542-0Interchangeable
interchangeable cross-reference
interchangeable
T521 004 301Interchangeable
interchangeable cross-reference
interchangeable
3179717-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1298-00-0-01-FIND 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1298-00-0-01-FIND 1?
1298-00-0-01-FIND 1 is a GASKET.
What parts can replace 1298-00-0-01-FIND 1?
There are 4 known substitutes for 1298-00-0-01-FIND 1: 512046, 3542-0, T521 004 301 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1298-00-0-01-FIND 1?
1298-00-0-01-FIND 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-701-2128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1298-00-0-01-FIND 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026