PartsTable
Technical Data Sheet
12976 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Our range of LINDY Bulk Network Cable is perfect for use with voice, 10BASE-T, 4-/16-Mbps Token Ring, 10base-T, 100BASE-TX, 1000Base-T, 100-Mbps TP-PMD, E1, 155-Mbps ATM, 622-Mbps ATM and many more high-speed applications.<br> <br>Package Contents:<br>100m CAT7 S/FTP LS0H Bulk Cable<br> <br>The cable is not intended to be used for "permanent integral installation in buildings" according to the EU Construction Products Regulation. It does not come with a certification for construction products. Like any standard network cable, it may also be used without appropriate certification.

The CE mark affixed to the cable certifies CE RoHS conformity. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-090-4742, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
12976
NSN: 5340-00-090-4742
FSC: 5340
CAGE: 70188 — FRANKLIN ENGINE CO INC (USA)
SPECIFICATIONS
materialPLASTIC METHYL METHACRYLATE
body_length0.700 INCHES MAXIMUM IN
design_typeFRICTION
specific_useSEVOCYLINDER,TAIL ROTOR
thread_class2A A
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
inductance_typeFIXED
mounting_methodBOLT
frequency_rating100.0 KILOHERTZ NOMINAL SINGLE COMPONENT
style_designatorSTRAIGHT ROUND STEPPED SHANK W/SHOULDER
winding_quantity1 SINGLE COMPONENT
NSN5340-00-090-4742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12976 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DESIGN TYPE: FRICTION
THREAD CLASS: 2A A
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.687-24 UNEF
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
THREAD CLASS2A A
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.687-24 UNEF
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
2GL153Upgraded Successor
successor cross-reference
successor
12976-GUpgraded Successor
successor cross-reference
successor
84905Interchangeable
interchangeable cross-reference
interchangeable
27-10395-2Interchangeable
interchangeable cross-reference
interchangeable
12976Interchangeable
interchangeable cross-reference
interchangeable
110 1-25/64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12976?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12976?
12976 is a REACTOR manufactured by Lindy.
What parts can replace 12976?
There are 17 known substitutes for 12976: 2GL153, 12976-G, 84905 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12976?
12976 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-090-4742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12976