PartsTable
Technical Data Sheet
Download PDF

129606 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

129606: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include shank_length: 0.200 INCHES NOMINAL IN, thread_class: 2A ROD CONNECTION A, thread_length: 2.620 INCHES NOMINAL ROD CONNECTION IN, shank_diameter: 0.424 INCHES NOMINAL IN, fork_span_width: 2.426 INCHES MINIMUM AND 2.434 INCHES MAXIMUM IN, style_designator: CLEVIS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-133-8830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
129606
NSN: 5340-01-133-8830
FSC: 5340 — Hardware, Commercial
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
shank_length0.200 INCHES NOMINAL IN
thread_class2A ROD CONNECTION A
thread_length2.620 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.424 INCHES NOMINAL IN
fork_span_width2.426 INCHES MINIMUM AND 2.434 INCHES MAXIMUM IN
special_featuresONE FORK ARM HAS ONE PINHOLE CENTERED AND THE OTHER ARM HAS TWO PINHOLES OFF-CENTERED WITH A COUNTERBORE DIA. OF 0.280 IN. AND 0.128 IN. DIA. IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.625 INCHES ROD CONNECTION IN
shank_shoulder_diameter0.625 INCHES NOMINAL IN
thread_series_designatorUNF ROD CONNECTION
rod_connection_bore_depth2.480 INCHES NOMINAL IN
NSN5340-01-133-8830
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 129606 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.424 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 2.426 INCHES MINIMUM AND 2.434 INCHES MAXIMUM IN
•
THREAD LENGTH: 2.620 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.200 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
SHANK SHOULDER DIAMETER: 0.625 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.625 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.424 INCHES NOMINAL IN
FORK SPAN WIDTH2.426 INCHES MINIMUM AND 2.434 INCHES MAXIMUM IN
THREAD LENGTH2.620 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.200 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
SHANK SHOULDER DIAMETER0.625 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.625 INCHES ROD CONNECTION IN
SPECIAL FEATURESONE FORK ARM HAS ONE PINHOLE CENTERED AND THE OTHER ARM HAS TWO PINHOLES OFF-CENTERED WITH A COUNTERBORE DIA. OF 0.280 IN. AND 0.128 IN. DIA. IN
ROD CONNECTION BORE DIAMETER0.370 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 129606?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 129606?
129606 is a CLEVIS,ROD END.
What is the NSN for 129606?
129606 is cataloged in the U.S. Government catalog under NSN 5340-01-133-8830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 129606

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.