PartsTable
Technical Data Sheet
Download PDF

12941442 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12941442: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5086, first_leg_angle: 147.0 DEGREES MINIMUM AND 153.0 DEGREES MAXIMUM, first_leg_style: SQUARE, first_leg_width: 30.880 INCHES MINIMUM AND 31.120 INCHES MAXIMUM IN, first_leg_length: 1.630 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-355-1487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12941442
NSN: 5340-01-355-1487
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5086
first_leg_angle147.0 DEGREES MINIMUM AND 153.0 DEGREES MAXIMUM
first_leg_styleSQUARE
first_leg_width30.880 INCHES MINIMUM AND 31.120 INCHES MAXIMUM IN
first_leg_length1.630 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length5.000 INCHES MINIMUM AND 5.240 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.190 INCHES NOMINAL IN
first_leg_slot_width0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
second_leg_thickness0.190 INCHES NOMINAL IN
first_leg_slot_length0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
NSN5340-01-355-1487
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12941442 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 147.0 DEGREES MINIMUM AND 153.0 DEGREES MAXIMUM
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG LENGTH: 5.000 INCHES MINIMUM AND 5.240 INCHES MAXIMUM IN
•
SECOND LEG SLOT WIDTH: 0.342 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: 2 SLOTS
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 4.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE147.0 DEGREES MINIMUM AND 153.0 DEGREES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG LENGTH5.000 INCHES MINIMUM AND 5.240 INCHES MAXIMUM IN
SECOND LEG SLOT WIDTH0.342 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE2 SLOTS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH4.250 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/7 H32 FED SPEC 3RD MATERIAL RESPONSE
SECOND LEG SLOT LENGTH0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12941442?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12941442?
12941442 is a BRACKET,ANGLE.
What is the NSN for 12941442?
12941442 is cataloged in the U.S. Government catalog under NSN 5340-01-355-1487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12941442

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.