PartsTable
Technical Data Sheet
Download PDF

129378 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

129378: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 1045 OVERALL, nut_height: 0.563 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, overall_height: 0.875 INCHES NOMINAL IN, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-518-7455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
129378
NSN: 5310-01-518-7455
FSC: 5310 — Nuts and Washers
CAGE: 7Q257 — HUXHOLD ENTERPRISES LLC (USA)
SPECIFICATIONS
materialSTEEL OR STEEL COMP 1045 OVERALL
nut_height0.563 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
overall_height0.875 INCHES NOMINAL IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
special_featuresHARDNESS FOR MATERIAL ST1045: ROCKWELL C 34-38; FLANGE IS FREE TO ROTATE AND RETAINED WITH NUT; NUT WIDTH BETWEEN FLATS: 1.50"(MAJOR) AND 1.49"(MINOR)
thread_directionRIGHT-HAND
surface_treatmentPHOSPHATE ZINC OVERALL
nominal_thread_size0.750 INCHES IN
end_item_identificationEND ITEM NSN 2330-00-331-2307
thread_quantity_per_inch16
NSN5310-01-518-7455
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 129378 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.563 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE ZINC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.875 INCHES NOMINAL IN
THREAD SERIESUNF
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.563 INCHES NOMINAL IN
SPECIAL FEATURESHARDNESS FOR MATERIAL ST1045: ROCKWELL C 34-38; FLANGE IS FREE TO ROTATE AND RETAINED WITH NUT; NUT WIDTH BETWEEN FLATS: 1.50"(MAJOR) AND 1.49"(MINOR)
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT, FLANGED
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 129378?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 129378?
129378 is a NUT,PLAIN,PLATE.
What is the NSN for 129378?
129378 is cataloged in the U.S. Government catalog under NSN 5310-01-518-7455. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 129378