12934584: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, hole_diameter: 0.420 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, overall_width: 1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN, overall_length: 3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/SQUARE CORNERS, surface_treatment: ANODIZE OR CHROMATE. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-355-1455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 5052 |
| hole_diameter | 0.420 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN |
| overall_width | 1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN |
| overall_length | 3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN |
| style_designator | NON-CIRCULAR W/SQUARE CORNERS |
| surface_treatment | ANODIZE OR CHROMATE |
| bolt_hole_quantity | 2 |
| material_document_and_classification | QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE |
| bolt_hole_centerline_to_nearest_edge_distance | 0.875 INCHES NOMINAL IN |
| surface_treatment_document_and_classification | MIL-A-8625,TY 1,CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541,CL 1A MIL SPEC 2ND TREATMENT RESPONSE A |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.625 INCHES NOMINAL IN |
| center_to_center_distance_between_bolt_holes_along_length | 1.375 INCHES NOMINAL IN |
| NSN | 5365-01-355-1455 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541,CL 1A MIL SPEC 2ND TREATMENT RESPONSE A |
| STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN |
| OVERALL WIDTH | 1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.875 INCHES NOMINAL IN |
| BOLT HOLE QUANTITY | 2 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.375 INCHES NOMINAL IN |
| SURFACE TREATMENT | ANODIZE OR CHROMATE |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.625 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.