PartsTable
Technical Data Sheet
Download PDF

1292048-101 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1292048-101: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.698 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN, thread_length: 1.540 INCHES NOMINAL ROD CONNECTION IN, thread_direction: RIGHT-HAND ROD CONNECTION, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-301-3262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1292048-101
NSN: 5340-00-301-3262
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
thread_class3A ROD CONNECTION A
hole_diameter0.698 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
thread_length1.540 INCHES NOMINAL ROD CONNECTION IN
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentANODIZE OVERALL
nominal_thread_size0.625 INCHES ROD CONNECTION IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
material_document_and_classificationQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationLC+77-2037,LOCKHEED AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-301-3262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1292048-101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: LC+77-2037,LOCKHEED AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.540 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.625 INCHES ROD CONNECTION IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
THREAD CLASS: 3A ROD CONNECTION A
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONLC+77-2037,LOCKHEED AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.540 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.625 INCHES ROD CONNECTION IN
SURFACE TREATMENTANODIZE OVERALL
THREAD CLASS3A ROD CONNECTION A
MATERIALALUMINUM ALLOY OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
HOLE DIAMETER0.698 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 1292048-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1292048-101?
1292048-101 is a CLEVIS,ROD END.
What is the NSN for 1292048-101?
1292048-101 is cataloged in the U.S. Government catalog under NSN 5340-00-301-3262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1292048-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.