12910694: 12910694.
The 12910694 is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, construction: ONE-PIECE, hole_diameter: 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, overall_width: 1.320 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN, overall_length: 6.440 INCHES MINIMUM AND 6.560 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/O RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-349-9699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 5052 |
| construction | ONE-PIECE |
| hole_diameter | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN |
| overall_width | 1.320 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN |
| overall_length | 6.440 INCHES MINIMUM AND 6.560 INCHES MAXIMUM IN |
| style_designator | NON-CIRCULAR W/O RADIUS |
| surface_treatment | ANODIZE OR CHROMATE |
| bolt_hole_quantity | 2 |
| material_document_and_classification | QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE |
| outside_corner_bevel_length_along_width | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| outside_corner_bevel_length_along_length | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| bolt_hole_centerline_to_nearest_edge_distance | 0.630 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| NSN | 5365-01-349-9699 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541,CL 1A MIL SPEC 2ND TREATMENT RESPONSE A |
| STYLE DESIGNATOR | NON-CIRCULAR W/O RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 6.440 INCHES MINIMUM AND 6.560 INCHES MAXIMUM IN |
| OVERALL WIDTH | 1.320 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.630 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 2 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.850 INCHES MINIMUM AND 4.910 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.