PartsTable
Technical Data Sheet
Download PDF

129048 — STRAP,TIE DOWN,ELECTRICAL COMPON

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

129048: STRAP,TIE DOWN,ELECTRICAL COMPON.

STRAP,TIE DOWN,ELECTRICAL COMPON. Key specifications include width: 0.75 INCHES NOMINAL IN, length: 18.0 INCHES NOMINAL IN, end_type: PLAIN, material: RUBBER SYNTHETIC, center_hole_diameter: 0.549 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-486-0862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
129048
NSN: 5331-00-486-0862
NIINs: 004860862, 016816443
FSC: 5331 — O-ring
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
width0.75 INCHES NOMINAL IN
length18.0 INCHES NOMINAL IN
end_typePLAIN
materialRUBBER SYNTHETIC
center_hole_diameter0.549 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_attachment/fastening_facilityBUCKLE
attachment_method_for_which_designedBUCKLE
part_name_assigned_by_controlling_agencyCABLE TIE
NSN5331-00-486-0862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 129048 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.549 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.549 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 2
47A1562Reference document
Same NSN cross-reference
Reference document — Secondary reference
160876Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 129048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 129048?
129048 is a STRAP,TIE DOWN,ELECTRICAL COMPON.
What parts can replace 129048?
There are 2 known substitutes for 129048: 47A1562, 160876. Substitute compatibility should be verified for your specific system.
What is the NSN for 129048?
129048 is cataloged in the U.S. Government catalog under NSN 5331-00-486-0862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 129048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.