PartsTable
Technical Data Sheet
Download PDF

129037-01 — BOLT,TEE HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

129037-01: BOLT,TEE HEAD.

The BOLT,TEE HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416F OVERALL, head_style: TEE NO. 3, head_height: 0.125 INCHES NOMINAL IN, head_length: 0.750 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5306-00-068-6213, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
129037-01
NSN: 5306-00-068-6213
FSC: 5306 — Bolts
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 416F OVERALL
head_styleTEE NO. 3
head_height0.125 INCHES NOMINAL IN
head_length0.750 INCHES NOMINAL IN
thread_class2A A
thread_length0.750 INCHES MINIMUM IN
fastener_length2.375 INCHES NOMINAL IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.420 INCHES NOMINAL IN
nominal_thread_diameter0.250 INCHES IN
NSN5306-00-068-6213
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 129037-01 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.125 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES MINIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: TEE NO. 3
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.125 INCHES NOMINAL IN
FASTENER LENGTH2.375 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES MINIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLETEE NO. 3
THREAD DIRECTIONRIGHT-HAND
HEAD LENGTH0.750 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.420 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
5306PL1493897Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 129037-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 129037-01?
129037-01 is a BOLT,TEE HEAD.
What parts can replace 129037-01?
There is 1 known substitute for 129037-01: 5306PL1493897. Substitute compatibility should be verified for your specific system.
What is the NSN for 129037-01?
129037-01 is cataloged in the U.S. Government catalog under NSN 5306-00-068-6213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 129037-01