PartsTable
Technical Data Sheet
Download PDF

128WS10842-13 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

128WS10842-13: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OVERALL, first_end_style: CHAMFERED, special_features: ADDITIONAL HOLE 0.069 IN. MIN,0.074 IN.

MAX DIA LOCATED 0.375 IN. FROM CENTER OF HOLE TO FIRST END OF PIN IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, pin_overall_length: 3.750 INCHES NOMINAL IN, first_hole_diameter: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-232-0563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128WS10842-13
NSN: 5315-01-232-0563
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OVERALL
first_end_styleCHAMFERED
special_featuresADDITIONAL HOLE 0.069 IN. MIN,0.074 IN. MAX DIA LOCATED 0.375 IN. FROM CENTER OF HOLE TO FIRST END OF PIN IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
pin_overall_length3.750 INCHES NOMINAL IN
first_hole_diameter0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
pin_overall_diameter0.1850 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
second_hole_diameter0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.020 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-232-0563
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 128WS10842-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1850 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.020 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1850 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.750 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 128WS10842-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128WS10842-13?
128WS10842-13 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 128WS10842-13?
128WS10842-13 is cataloged in the U.S. Government catalog under NSN 5315-01-232-0563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128WS10842-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.