PartsTable
Technical Data Sheet
Download PDF

128SCCS101-1 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

128SCCS101-1: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.5100 INCHES NOMINAL IN, stud_diameter: 0.3908 INCHES NOMINAL IN, overall_length: 0.9940 INCHES NOMINAL IN, outer_ring_width: 0.4690 INCHES NOMINAL IN, special_features: UNTHREADED STUD. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-973-8089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128SCCS101-1
NSN: 3110-00-973-8089
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.5100 INCHES NOMINAL IN
stud_diameter0.3908 INCHES NOMINAL IN
overall_length0.9940 INCHES NOMINAL IN
outer_ring_width0.4690 INCHES NOMINAL IN
special_featuresUNTHREADED STUD
lubrication_materialGREASE
overall_outside_diameter0.8760 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-973-8089
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 128SCCS101-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4690 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.8760 INCHES NOMINAL IN
•
STUD LENGTH: 0.5100 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4690 INCHES NOMINAL IN
OVERALL LENGTH0.9940 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8760 INCHES NOMINAL IN
STUD LENGTH0.5100 INCHES NOMINAL IN
SPECIAL FEATURESUNTHREADED STUD
MATERIALSTEEL OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STUD DIAMETER0.3908 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
CF-1415Reference document
Same NSN cross-reference
Reference document — Secondary reference
039CTX02PPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 128SCCS101-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128SCCS101-1?
128SCCS101-1 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace 128SCCS101-1?
There are 2 known substitutes for 128SCCS101-1: CF-1415, 039CTX02PP. Substitute compatibility should be verified for your specific system.
What is the NSN for 128SCCS101-1?
128SCCS101-1 is cataloged in the U.S. Government catalog under NSN 3110-00-973-8089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128SCCS101-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.