PartsTable
Technical Data Sheet
Download PDF

128LM10162-1 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

128LM10162-1: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, thread_class: 3B, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 3.0000 INCHES NOMINAL IN, shank_diameter: 0.4370 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-973-8286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128LM10162-1
NSN: 3110-00-973-8286
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 65789 — GA RICHARDS & CO INC (USA)
SPECIFICATIONS
materialSTEEL INNER RING
thread_class3B
bore_diameter0.2500 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
overall_length3.0000 INCHES NOMINAL IN
shank_diameter0.4370 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.2810 INCHES NOMINAL IN
outer_ring_width0.2190 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.5000 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
NSN3110-00-973-8286
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 128LM10162-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4370 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.5000 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.5000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2190 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4370 INCHES NOMINAL IN
SHANK THREAD LENGTH1.5000 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.5000 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2190 INCHES NOMINAL IN
SHIELD QUANTITY2
OVERALL LENGTH3.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.7500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 128LM10162-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128LM10162-1?
128LM10162-1 is a BEARING,BALL,ROD END.
What is the NSN for 128LM10162-1?
128LM10162-1 is cataloged in the U.S. Government catalog under NSN 3110-00-973-8286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128LM10162-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.