PartsTable
Technical Data Sheet
Download PDF

128HM10086-1 — LEVER,REMOTE CONTROL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

128HM10086-1: LEVER,REMOTE CONTROL.

The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, bore_type: D-SHAPED, bore_length: 0.562 INCHES NOMINAL IN, bore_radius: 0.031 INCHES NOMINAL IN, special_features: OFFSET HEIGHT: 0.472 IN. NOMINAL IN, link_end_thickness: 0.638 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 1680-00-970-9232, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128HM10086-1
NSN: 1680-00-970-9232
FSC: 1680 — Miscellaneous Aircraft Accessories and Components
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
bore_typeD-SHAPED
bore_length0.562 INCHES NOMINAL IN
bore_radius0.031 INCHES NOMINAL IN
special_featuresOFFSET HEIGHT: 0.472 IN. NOMINAL IN
link_end_thickness0.638 INCHES NOMINAL IN
link_end_hole_diameter0.191 INCHES NOMINAL IN
distance_between_fork_inside_spread0.442 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE
center_to_center_distance_between_link_and_shaft_holes2.500 INCHES NOMINAL IN
NSN1680-00-970-9232
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available LEVER,REMOTE CONTROL TITLE COMPONENT PN 128HM10086-1 MFR LEVER,REMOTE CONTROL
KEY FEATURES
•
LINK END THICKNESS: 0.638 INCHES NOMINAL IN
•
LINK END HOLE DIAMETER: 0.191 INCHES NOMINAL IN
•
BORE LENGTH: 0.562 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE
•
BORE TYPE: D-SHAPED
•
DISTANCE BETWEEN FORK INSIDE SPREAD: 0.442 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LINK END THICKNESS0.638 INCHES NOMINAL IN
LINK END HOLE DIAMETER0.191 INCHES NOMINAL IN
BORE LENGTH0.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE
BORE TYPED-SHAPED
DISTANCE BETWEEN FORK INSIDE SPREAD0.442 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES2.500 INCHES NOMINAL IN
SPECIAL FEATURESOFFSET HEIGHT: 0.472 IN. NOMINAL IN
MATERIALALUMINUM ALLOY
BORE RADIUS0.031 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
128HM10086Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedDemilitarization required — mutilation
Ready to buy 128HM10086-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128HM10086-1?
128HM10086-1 is a LEVER,REMOTE CONTROL.
What parts can replace 128HM10086-1?
There is 1 known substitute for 128HM10086-1: 128HM10086. Substitute compatibility should be verified for your specific system.
What is the NSN for 128HM10086-1?
128HM10086-1 is cataloged in the U.S. Government catalog under NSN 1680-00-970-9232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128HM10086-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.