PartsTable
Technical Data Sheet
Download PDF

128CVM10814-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

128CVM10814-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, heat_treatment: T-4 SOLUTION HEAT TREATED, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 0.672 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 1.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-970-9147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128CVM10814-1
NSN: 5340-00-970-9147
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
heat_treatmentT-4 SOLUTION HEAT TREATED
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length0.672 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.344 INCHES NOMINAL IN
surface_treatmentLACQUER
first_leg_thickness0.125 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
first_leg_hole_diameter0.201 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
second_leg_hole_diameter0.653 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
NSN5340-00-970-9147
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 128CVM10814-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.688 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.201 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG HOLE DIAMETER: 0.653 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.344 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.688 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.201 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.653 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
SECOND LEG LENGTH1.344 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL IN
HEAT TREATMENTT-4 SOLUTION HEAT TREATED
STYLE DESIGNATORANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 128CVM10814-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128CVM10814-1?
128CVM10814-1 is a BRACKET,ANGLE.
What is the NSN for 128CVM10814-1?
128CVM10814-1 is cataloged in the U.S. Government catalog under NSN 5340-00-970-9147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128CVM10814-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.