PartsTable
Technical Data Sheet
Download PDF

128CM12290-1 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

128CM12290-1: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_diameter: 0.2495 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 2.8750 INCHES NOMINAL IN, shank_diameter: 0.6250 INCHES NOMINAL IN, inner_ring_width: 0.4840 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-913-2733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128CM12290-1
NSN: 3110-00-913-2733
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_diameter0.2495 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
overall_length2.8750 INCHES NOMINAL IN
shank_diameter0.6250 INCHES NOMINAL IN
inner_ring_width0.4840 INCHES NOMINAL IN
outer_ring_width0.3350 INCHES NOMINAL IN
shank_bore_depth1.2190 INCHES MINIMUM AND 1.2810 INCHES MAXIMUM IN
surface_treatmentANODIZE ROD END BODY
shank_bore_diameter0.3890 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN
lubrication_materialGREASE
overall_outside_diameter0.9014 INCHES NOMINAL IN
NSN3110-00-913-2733
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 128CM12290-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.6250 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3350 INCHES NOMINAL IN
•
SHANK BORE DEPTH: 1.2190 INCHES MINIMUM AND 1.2810 INCHES MAXIMUM IN
•
SHANK BORE DIAMETER: 0.3890 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.9014 INCHES NOMINAL IN
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.6250 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3350 INCHES NOMINAL IN
SHANK BORE DEPTH1.2190 INCHES MINIMUM AND 1.2810 INCHES MAXIMUM IN
OVERALL LENGTH2.8750 INCHES NOMINAL IN
SHANK BORE DIAMETER0.3890 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.9014 INCHES NOMINAL IN
ALIGNMENT TYPESELF-ALIGNING
SURFACE TREATMENTANODIZE ROD END BODY
BORE DIAMETER0.2495 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 128CM12290-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128CM12290-1?
128CM12290-1 is a BEARING,BALL,ROD END.
What is the NSN for 128CM12290-1?
128CM12290-1 is cataloged in the U.S. Government catalog under NSN 3110-00-913-2733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128CM12290-1