PartsTable
Technical Data Sheet
Download PDF

128BM60026-11 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

128BM60026-11: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, fork_depth: 1.811 INCHES NOMINAL IN, hole_diameter: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, overall_width: 0.563 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, fork_span_width: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-256-2248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
128BM60026-11
NSN: 5340-01-256-2248
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
fork_depth1.811 INCHES NOMINAL IN
hole_diameter0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
overall_width0.563 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
fork_span_width0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
special_featuresADDITIONAL PIVOT HOLE 0.625 IN. FROM FIRST PIVOT HOLE; COLOR DARK GULL GRAY IN
surface_treatmentLACQUER OVERALL
fork_arm_thickness0.156 INCHES NOMINAL IN
securing_pin_hole_diameter0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/12,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-L-81352 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-256-2248
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 128BM60026-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-L-81352 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/12,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
FORK ARM THICKNESS0.156 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-L-81352 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/12,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.563 INCHES NOMINAL IN
SPECIAL FEATURESADDITIONAL PIVOT HOLE 0.625 IN. FROM FIRST PIVOT HOLE; COLOR DARK GULL GRAY IN
SURFACE TREATMENTLACQUER OVERALL
MATERIALALUMINUM ALLOY 7075 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 128BM60026-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 128BM60026-11?
128BM60026-11 is a CLEVIS,ROD END.
What is the NSN for 128BM60026-11?
128BM60026-11 is cataloged in the U.S. Government catalog under NSN 5340-01-256-2248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 128BM60026-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.