PartsTable
Technical Data Sheet
Download PDF

12797H5L16 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12797H5L16: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.468 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 5.006 INCHES NOMINAL IN, accommodated_shaft_diameter: 3.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-004-1520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12797H5L16
NSN: 5330-00-004-1520
FSC: 5330 — Packing and Gasket Materials
CAGE: 48482 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV ENGINEERED POLYMER SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.468 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
constructionSOLID
housing_bore_diameter5.006 INCHES NOMINAL IN
accommodated_shaft_diameter3.750 INCHES NOMINAL IN
cross-sectional_shape_styleDUAL LIP
NSN5330-00-004-1520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12797H5L16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.468 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.006 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: DUAL LIP
•
ACCOMMODATED SHAFT DIAMETER: 3.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.468 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.006 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEDUAL LIP
ACCOMMODATED SHAFT DIAMETER3.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-001-9852 5330-00-003-9246 5330-00-004-1681 5330-00-004-3196 5330-00-004-3450 5330-00-004-3451 5330-00-004-4245 5330-00-004-5072
SUBSTITUTES & CROSS-REFERENCES 1
12797LDSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12797H5L16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12797H5L16?
12797H5L16 is a SEAL,PLAIN.
What parts can replace 12797H5L16?
There is 1 known substitute for 12797H5L16: 12797LDS. Substitute compatibility should be verified for your specific system.
What is the NSN for 12797H5L16?
12797H5L16 is cataloged in the U.S. Government catalog under NSN 5330-00-004-1520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12797H5L16