PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 127861
127861 ✓ Verified by PartsTable
Hypertec · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

A Hypertec® ProConnectLite® High Speed HDMI 2.0 cable-1.5m. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.6929 INCHES NOMINAL IN, surface_finish: GROUND, inner_ring_width: 0.6690 INCHES NOMINAL IN, outer_ring_width: 0.5800 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-7208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
127861
NSN: 3110-00-158-7208
FSC: 3110
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.6929 INCHES NOMINAL IN
surface_finishGROUND
inner_ring_width0.6690 INCHES NOMINAL IN
outer_ring_width0.5800 INCHES NOMINAL IN
special_featuresCONTACT ANGLE 14 DEG,OUTER RING OD RADIUS 0.0400 IN,INNER RING ID RADIUS 0.0600 IN,SNAP RING ON OD OF INNER RING,COMPLEMENT OF 16 ROLLERS IN
style_designatorANGULAR CONTACT, SPHERICAL ROLLERS, SEPARABLE
overall_outside_diameter2.9528 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationRBEC NO.1
NSN3110-00-158-7208
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 127861 · Hypertec ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: ANGULAR CONTACT, SPHERICAL ROLLERS, SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SPECIAL FEATURESCONTACT ANGLE 14 DEG,OUTER RING OD RADIUS 0.0400 IN,INNER RING ID RADIUS 0.0600 IN,SNAP RING ON OD OF INNER RING,COMPLEMENT OF 16 ROLLERS IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORANGULAR CONTACT, SPHERICAL ROLLERS, SEPARABLE
MATERIALSTEEL OVERALL
STYLE DESIGNATORANGULAR CONTACT, SPHERICAL ROLLERS, SEPARABLE
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER1.6929 INCHES NOMINAL IN
INNER RING WIDTH0.6690 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
250049Interchangeable
interchangeable cross-reference
interchangeable
0211594-7Interchangeable
interchangeable cross-reference
interchangeable
026-4722Interchangeable
interchangeable cross-reference
interchangeable
149523Interchangeable
Same NIIN cross-reference
interchangeable
KA11360ZInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 127861?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 127861?
127861 is a BEARING,ROLLER,SELF-ALIGNING manufactured by Hypertec.
What parts can replace 127861?
There are 5 known substitutes for 127861: 250049, 0211594-7, 026-4722 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 127861?
127861 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-7208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 127861

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026