PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 127706
127706 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include part_name_assigned_by_controlling_agency: MOUNTING BRACKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6484, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
127706
NSN: 5310-00-185-6484
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
special_featuresMOUNTING BRACKET FOR IV POLE AND STRETCHERS TO SUPPORT THE MADM, MOBILE ANESTHESIA DELIVERY MODULE, END ITEM NSN 6515-01-666-9532. PRODUCT DEVICE CODE, 99998.
part_name_assigned_by_controlling_agencyMOUNTING BRACKET
NSN5310-00-185-6484
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 127706 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT DIAMETER: 1.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD PITCH DIAMETERS: +0.6437 TO 0.6467 INCHES IN
•
THREAD SERIES: UNS
•
NOMINAL THREAD SIZE: 0.664 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
DRIVE POINT DEPTH: 0.094 INCHES NOMINAL IN
•
DRIVE POINT QUANTITY: 4
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
NUT DIAMETER1.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
THREAD PITCH DIAMETERS+0.6437 TO 0.6467 INCHES IN
THREAD SERIESUNS
NOMINAL THREAD SIZE0.664 INCHES IN
THREAD QUANTITY PER INCH32
DRIVE POINT DEPTH0.094 INCHES NOMINAL IN
DRIVE POINT QUANTITY4
MATERIALSTEEL OVERALL
NUT THICKNESS0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
73044Interchangeable
interchangeable cross-reference
interchangeable
654132Interchangeable
interchangeable cross-reference
interchangeable
573324R91Interchangeable
interchangeable cross-reference
interchangeable
A308121AInterchangeable
interchangeable cross-reference
interchangeable
N03Interchangeable
interchangeable cross-reference
interchangeable
48185-351-00-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 127706?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 127706?
127706 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 127706?
There are 25 known substitutes for 127706: 73044, 654132, 573324R91 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 127706?
127706 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6484. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 127706

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026