Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
A Hypertec ProConnectLite DVI-A to VGA Single-Link cable-2m. Key specifications include material: ALUMINUM, part_name_assigned_by_controlling_agency: COVER, REAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-012-4932, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
127701
NSN:5330-00-012-4932 FSC:5330 CAGE:56190 — METADURE PARTS & SALES, INC. (USA)
SPECIFICATIONS
material
ALUMINUM
part_name_assigned_by_controlling_agency
COVER, REAR
NSN
5330-00-012-4932
COMPONENT DIAGRAM
KEY FEATURES
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG715 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.021 INCHES MINIMUM AND 1.041 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.024 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH
1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
APERTURE DIAMETER
0.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 2BG715 ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH
1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
HOLE DIAMETER
0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
1.021 INCHES MINIMUM AND 1.041 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS
0.024 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
0.156 INCHES NOMINAL IN
HARDNESS RATING
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL