PartsTable
Technical Data Sheet
Download PDF

1276-08-219 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1276-08-219: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 9.992 MILLIMETERS MINIMUM AND 10.002 MILLIMETERS MAXIMUM MM, overall_width: 19.88 MILLIMETERS MINIMUM AND 20.00 MILLIMETERS MAXIMUM MM, alignment_type: RIGID, surface_finish: GROUND, overall_outside_diameter: 21.989 MILLIMETERS MINIMUM AND 22.002 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-081-8186, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1276-08-219
NSN: 3110-01-081-8186
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 44114 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter9.992 MILLIMETERS MINIMUM AND 10.002 MILLIMETERS MAXIMUM MM
overall_width19.88 MILLIMETERS MINIMUM AND 20.00 MILLIMETERS MAXIMUM MM
alignment_typeRIGID
surface_finishGROUND
overall_outside_diameter21.989 MILLIMETERS MINIMUM AND 22.002 MILLIMETERS MAXIMUM MM
NSN3110-01-081-8186
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1276-08-219 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 21.989 MILLIMETERS MINIMUM AND 22.002 MILLIMETERS MAXIMUM MM
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 9.992 MILLIMETERS MINIMUM AND 10.002 MILLIMETERS MAXIMUM MM
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
OVERALL WIDTH19.88 MILLIMETERS MINIMUM AND 20.00 MILLIMETERS MAXIMUM MM
OVERALL OUTSIDE DIAMETER21.989 MILLIMETERS MINIMUM AND 22.002 MILLIMETERS MAXIMUM MM
ALIGNMENT TYPERIGID
BORE DIAMETER9.992 MILLIMETERS MINIMUM AND 10.002 MILLIMETERS MAXIMUM MM
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 3
AP-51313Reference document
Same NSN cross-reference
Reference document — Secondary reference
3110PL0829923Reference document
Same NSN cross-reference
Reference document — Informative reference only
5518991Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1276-08-219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1276-08-219?
1276-08-219 is a BEARING,ROLLER,NEEDLE.
What parts can replace 1276-08-219?
There are 3 known substitutes for 1276-08-219: AP-51313, 3110PL0829923, 5518991. Substitute compatibility should be verified for your specific system.
What is the NSN for 1276-08-219?
1276-08-219 is cataloged in the U.S. Government catalog under NSN 3110-01-081-8186. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1276-08-219