PartsTable
Technical Data Sheet
Download PDF

12759-00850 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12759-00850: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.213 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: PREVAILING TORQUE. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-572-7923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12759-00850
NSN: 5310-01-572-7923
FSC: 5310 — Nuts and Washers
CAGE: 0Y3H3 — FASTENAL COMPANY DBA FASTENAL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.213 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresPREVAILING TORQUE
thread_directionRIGHT-HAND
surface_treatmentZINC AND DICHROMATE OVERALL
width_across_flats0.431 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeFLAT
end_item_identificationBRITISH ARMY MASTIFF 2 VEHICLE; MRAP BUFFALO MK2A2; MRAP - COUGAR; MRAP - COUGAR CAT1 A2
NSN5310-01-572-7923
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12759-00850 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.431 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.213 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC AND DICHROMATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.431 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.213 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
SPECIAL FEATURESPREVAILING TORQUE
SURFACE TREATMENTZINC AND DICHROMATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT, HEX PREV TORQ 1/4-20 GR C
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 3
36402Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
60793-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1136402Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12759-00850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12759-00850?
12759-00850 is a NUT,PLAIN,HEXAGON.
What parts can replace 12759-00850?
There are 3 known substitutes for 12759-00850: 36402, 60793-000, 1136402. Substitute compatibility should be verified for your specific system.
What is the NSN for 12759-00850?
12759-00850 is cataloged in the U.S. Government catalog under NSN 5310-01-572-7923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12759-00850