PartsTable
Technical Data Sheet
Download PDF

12752 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
Lindy · MRO · MRO_GENERAL
PRODUCT OVERVIEW

12752: RESISTOR,VARIABLE,NONWIRE WOUND,.

- High quality angled terminal block contacts - Accepts 22-26 AWG solid core wire - Dual type terminal blocks (for Krone/110 compatible punchdown tools) - Dual standard labelling (T568A/T568B colour coding standards) - Cable tie mounts and cable ties supplied for cable management - 16(1U), 32(2U), 48(2U), 72(3U) and 96(4U) port versions also available - Fixing screws, cage nuts and washers supplied separately (Part No. 66034) This part is cataloged in the U.S. Government catalog under NSN 5905-01-096-9842, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 12752
NSN: 5905-01-096-9842
NIINs: 010969842, 013733695, 014918770, 014985354
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.100 INCHES MAXIMUM IN
shaft_styleROUND, STEPPED
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.480 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter0.875 INCHES NOMINAL IN
lateral_runout0.002 INCHES IN
pilot_diameter0.7810 INCHES MAXIMUM IN
shaft_diameter0.1248 INCHES MAXIMUM IN
NSN5905-01-096-9842
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Lindy RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN 12752 MFR Lindy RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 0.875 INCHES NOMINAL IN
•
UNDERCUT LENGTH: 0.110 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 6.000 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION
•
UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.875 INCHES NOMINAL IN
UNDERCUT LENGTH0.110 INCHES NOMINAL IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION6.000 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
UNDERCUT WIDTH0.0570 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.1248 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
09SF7064Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
78FL2-176Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
78FL2-177Reference document
Same NSN cross-reference
Reference document — Secondary reference
14C1-3447Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S5430W/883BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12752?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12752?
12752 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12752?
There are 5 known substitutes for 12752: 09SF7064, 78FL2-176, 78FL2-177 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12752?
12752 is cataloged in the U.S. Government catalog under NSN 5905-01-096-9842. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12752