PartsTable
Technical Data Sheet
12745 ✓ Verified by PartsTable
DYMO · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LEAD,STORAGE BATTERY is a DYMO cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, conductor_form: STRANDED SINGLE CONDUCTOR, special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, style_designator: PLAIN FLANGED, termination_type: TERMINAL LUG SECOND END SINGLE CONDUCTOR, terminal_polarity: NEGATIVE BOTH ENDS SINGLE CONDUCTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-073-0436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12745
NSN: 5330-00-073-0436
FSC: 5330
CAGE: 96105 — FUNK MFG CO SUB OF DEERE AND CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
conductor_formSTRANDED SINGLE CONDUCTOR
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
style_designatorPLAIN FLANGED
termination_typeTERMINAL LUG SECOND END SINGLE CONDUCTOR
terminal_polarityNEGATIVE BOTH ENDS SINGLE CONDUCTOR
cross-sectional_height0.116 INCHES NOMINAL IN
end_item_identificationF/A-22 RAPTOR
cross-sectional_shape_styleROUND
NSN5330-00-073-0436
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12745 MFR: DYMO ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
12745Interchangeable
interchangeable cross-reference
interchangeable
372618R1Interchangeable
interchangeable cross-reference
interchangeable
1025-2Interchangeable
interchangeable cross-reference
interchangeable
F37020-112Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12745?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12745?
12745 is a LEAD,STORAGE BATTERY manufactured by DYMO.
What parts can replace 12745?
There are 4 known substitutes for 12745: 12745, 372618R1, 1025-2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12745?
12745 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-073-0436. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12745