PartsTable
Technical Data Sheet
Download PDF

12742-SS-1032-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12742-SS-1032-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 303 OVERALL, overall_length: 4.281 INCHES NOMINAL IN, handle_clearance: 1.719 INCHES NOMINAL IN, special_features: SWIVEL CAPACITY OF 180.0 DEGREES, surface_treatment: PASSIVATE OVERALL, nominal_thread_size: 0.190 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-288-0207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12742-SS-1032-7
NSN: 5340-01-288-0207
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL OR STEEL COMP 303 OVERALL
overall_length4.281 INCHES NOMINAL IN
handle_clearance1.719 INCHES NOMINAL IN
special_featuresSWIVEL CAPACITY OF 180.0 DEGREES
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
mounting_facility_length0.875 INCHES NOMINAL0.875 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A581 ASSN STD 1ST MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-01-288-0207
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12742-SS-1032-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 0.875 INCHES NOMINAL0.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD 1ST MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.719 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH0.875 INCHES NOMINAL0.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581 ASSN STD 1ST MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.281 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.719 INCHES NOMINAL IN
SPECIAL FEATURESSWIVEL CAPACITY OF 180.0 DEGREES
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12742-SS-1032-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12742-SS-1032-7?
12742-SS-1032-7 is a HANDLE,BOW.
What is the NSN for 12742-SS-1032-7?
12742-SS-1032-7 is cataloged in the U.S. Government catalog under NSN 5340-01-288-0207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12742-SS-1032-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.