PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 127272
127272 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MUFFLER,EXHAUST is a the manufacturer industrial component. Key specifications include width: 14.000 INCHES NOMINAL IN, length: 17.000 INCHES NOMINAL IN, corner_cut_type: ROUND, special_features: LEAD SCREEN VACUUM DAYPACK FILM, precious_material: SILVER, precious_material_and_weight: 0.040 SILVER GRAINS, TROY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-809-9285, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
127272
NSN: 5310-00-809-9285
FSC: 5310
CAGE: 07KQ5 — DEFENSE & DEVELOPMENT ENTERPRISES LLC (USA)
SPECIFICATIONS
width14.000 INCHES NOMINAL IN
length17.000 INCHES NOMINAL IN
corner_cut_typeROUND
special_featuresLEAD SCREEN VACUUM DAYPACK FILM
precious_materialSILVER
precious_material_and_weight0.040 SILVER GRAINS, TROY
precious_material_and_locationEMULSION SILVER
NSN5310-00-809-9285
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 127272 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
THICKNESS: 0.094 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206,TYPE 1,CL 16R1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: WOOL COMP 16R1 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
MINIMUM TENSILE STRENGTH: 500 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.781 INCHES NOMINAL IN
THICKNESS0.094 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206,TYPE 1,CL 16R1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALWOOL COMP 16R1 OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER1.000 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
MINIMUM TENSILE STRENGTH500 POUNDS PER SQUARE INCH LBS
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ABT8752Interchangeable
interchangeable cross-reference
interchangeable
8752Interchangeable
interchangeable cross-reference
interchangeable
T-8752Interchangeable
interchangeable cross-reference
interchangeable
D-547948 ITEM 29Interchangeable
interchangeable cross-reference
interchangeable
127-272Interchangeable
interchangeable cross-reference
interchangeable
RADIOGRAPHIC NDT 70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 127272?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 127272?
127272 is a MUFFLER,EXHAUST.
What parts can replace 127272?
There are 6 known substitutes for 127272: ABT8752, 8752, T-8752 and 3 more. Substitute compatibility should be verified for your specific system.
Is 127272 still available?
127272 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 127272

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026