PartsTable
Technical Data Sheet
Download PDF

12705-6C-6D — SCREW,SHOULDER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

12705-6C-6D: SCREW,SHOULDER.

The SCREW,SHOULDER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.543 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, thread_length: 0.399 INCHES MINIMUM AND 0.417 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-173-4793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12705-6C-6D
NSN: 5305-01-173-4793
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.543 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
thread_length0.399 INCHES MINIMUM AND 0.417 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
fastener_length0.852 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
shoulder_length0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM FIRST SHOULDER IN
thread_directionRIGHT-HAND
shoulder_diameter0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM FIRST SHOULDER IN
NSN5305-01-173-4793
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 12705-6C-6D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.852 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
•
SHOULDER LENGTH: 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM FIRST SHOULDER IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SHOULDER DIAMETER: 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM FIRST SHOULDER IN
•
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.417 INCHES MAXIMUM IN
•
SHOULDER SHAPE: ROUND FIRST SHOULDER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HEAD HEIGHT0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH0.852 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
SHOULDER LENGTH0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM FIRST SHOULDER IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SHOULDER DIAMETER0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM FIRST SHOULDER IN
THREAD LENGTH0.399 INCHES MINIMUM AND 0.417 INCHES MAXIMUM IN
SHOULDER SHAPEROUND FIRST SHOULDER
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
12705-6C-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6509973Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12705-6C-6D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12705-6C-6D?
12705-6C-6D is a SCREW,SHOULDER.
What parts can replace 12705-6C-6D?
There are 2 known substitutes for 12705-6C-6D: 12705-6C-6, 6509973. Substitute compatibility should be verified for your specific system.
What is the NSN for 12705-6C-6D?
12705-6C-6D is cataloged in the U.S. Government catalog under NSN 5305-01-173-4793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12705-6C-6D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.