PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 127-0036-005
127-0036-005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-845-4887, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
127-0036-005
NSN: 5340-00-845-4887
FSC: 5340
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.182 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.567 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.379 INCHES NOMINAL IN
NSN5340-00-845-4887
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 127-0036-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.567 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.379 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: PLASTIC BAND
•
LOOP INSIDE DIAMETER: 0.182 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END0.567 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.379 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALPLASTIC BAND
LOOP INSIDE DIAMETER0.182 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AF07589Interchangeable
interchangeable cross-reference
interchangeable
1645-18Interchangeable
interchangeable cross-reference
interchangeable
BFG3661Interchangeable
interchangeable cross-reference
interchangeable
5-16 6Interchangeable
interchangeable cross-reference
interchangeable
1JA7562H10Interchangeable
interchangeable cross-reference
interchangeable
CLN3-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 127-0036-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 127-0036-005?
127-0036-005 is a CLAMP,LOOP.
What parts can replace 127-0036-005?
There are 8 known substitutes for 127-0036-005: AF07589, 1645-18, BFG3661 and 5 more. Substitute compatibility should be verified for your specific system.
Is 127-0036-005 still available?
127-0036-005 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 127-0036-005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026