PartsTable
Technical Data Sheet
Download PDF

1264812-1 — HINGE,ACCESS DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1264812-1: HINGE,ACCESS DOOR.

The HINGE,ACCESS DOOR is a the manufacturer industrial component. Key specifications include material: STEEL PIN, body_width: 4.000 INCHES NOMINAL IN, pin_tip_style: OVAL HEAD, style_designator: BUTT W/JAMB LEAF OFFSET, material_thickness: 0.093 INCHES NOMINAL IN, mounting_hole_diameter: 0.195 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-530-1665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1264812-1
NSN: 5340-01-530-1665
FSC: 5340 — Hardware, Commercial
CAGE: 04DG4 — GENERAL DYNAMICS MISSION SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL PIN
body_width4.000 INCHES NOMINAL IN
pin_tip_styleOVAL HEAD
style_designatorBUTT W/JAMB LEAF OFFSET
material_thickness0.093 INCHES NOMINAL IN
mounting_hole_diameter0.195 INCHES NOMINAL IN
mounting_hole_quantity7
end_item_identification8S-842/G
jamb_leaf_offset_distance0.820 INCHES NOMINAL IN
pin_center_to_body_edge_distance2.750 INCHES NOMINAL IN
developed_distance_from_pin_center_to_offset_jamb_leaf_edge1.250 INCHES NOMINAL IN
NSN5340-01-530-1665
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1264812-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 7
•
DEVELOPED DISTANCE FROM PIN CENTER TO OFFSET JAMB LEAF EDGE: 1.250 INCHES NOMINAL IN
•
BODY WIDTH: 4.000 INCHES NOMINAL IN
•
PIN TIP STYLE: OVAL HEAD
•
STYLE DESIGNATOR: BUTT W/JAMB LEAF OFFSET
•
MOUNTING HOLE DIAMETER: 0.195 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 2.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY7
DEVELOPED DISTANCE FROM PIN CENTER TO OFFSET JAMB LEAF EDGE1.250 INCHES NOMINAL IN
BODY WIDTH4.000 INCHES NOMINAL IN
PIN TIP STYLEOVAL HEAD
STYLE DESIGNATORBUTT W/JAMB LEAF OFFSET
MOUNTING HOLE DIAMETER0.195 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE2.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
END ITEM IDENTIFICATION8S-842/G
MATERIALSTEEL PIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1264812-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1264812-1?
1264812-1 is a HINGE,ACCESS DOOR.
What is the NSN for 1264812-1?
1264812-1 is cataloged in the U.S. Government catalog under NSN 5340-01-530-1665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1264812-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.