PartsTable
Technical Data Sheet
Download PDF

1264 — TERMINAL,QUICK DISCONNECT

✓ Government record, cited
BOHLT · ORING SEAL
PRODUCT OVERVIEW

1264: TERMINAL,QUICK DISCONNECT.

Handlebar compatible with the R160, X200 and FAT20. Key specifications include radius: 1.375 INCHES NOMINAL IN, material: STEEL OVERALL, body_style: CHAMFERED ENDS W/END SLOT, bore_style: STRAIGHT-THRU BORE, head_angle: 15.0 DEGREES NOMINAL, head_style: FLAT COUNTERSUNK. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-050-1600, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1264
NSN: 5340-00-050-1600
NIINs: 000501600, 002034797, 002879648, 003871601, 004483642, 004765244, 010082786, 010379168, 011394483, 011397964, 011620184, 011722352, 013351242, 013801876, 013861834, 015312958, 015888826, 016700137
FSC: 5340 — Hardware, Commercial
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
radius1.375 INCHES NOMINAL IN
materialSTEEL OVERALL
body_styleCHAMFERED ENDS W/END SLOT
bore_styleSTRAIGHT-THRU BORE
head_angle15.0 DEGREES NOMINAL
head_styleFLAT COUNTERSUNK
hole_depth0.1850 INCHES NOMINAL IN
slot_depth0.1562 INCHES NOMINAL IN
slot_width0.1250 INCHES NOMINAL IN
body_length3.500 INCHES NOMINAL IN
thread_class2A A
bore_diameter0.5000 INCHES NOMINAL IN
NSN5340-00-050-1600
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1264 MFR: BOHLT ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 1.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.122 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
RADIUS1.375 INCHES NOMINAL IN
OUTSIDE DIAMETER1.122 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 9
X2247Reference document
Same NSN cross-reference
Reference document — Secondary reference
S716Reference document
Same NSN cross-reference
Reference document — Secondary reference
106517Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
S701Reference document
Same NSN cross-reference
Reference document — Secondary reference
019-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-52420-08Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1264?
1264 is a TERMINAL,QUICK DISCONNECT manufactured by BOHLT.
What parts can replace 1264?
There are 9 known substitutes for 1264: X2247, S716, 106517 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1264?
1264 is cataloged in the U.S. Government catalog under NSN 5340-00-050-1600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1264

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.