PartsTable
Technical Data Sheet

12633-3 — Technical Data Sheet

✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Form-fitting cover which protects the Sony Xperia Z5 Premium from scratches<br>- Openings for full access to connections<br>- Flexible plastic cover<br>- Non-slip surface. Key specifications include material: RUBBER SYNTHETIC, base_style: DOUBLE CONTACT BAYONET CANDELABRA, bulb_style: C (CONE), overall_length: 2.188 INCHES MAXIMUM IN, voltage_rating: 120.000 VOLTS NOMINAL, wattage_rating: 10.000 WATTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5331-00-677-9817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12633-3
NSN: 5331-00-677-9817
FSC: 5331 — O-RING
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
base_styleDOUBLE CONTACT BAYONET CANDELABRA
bulb_styleC (CONE)
overall_length2.188 INCHES MAXIMUM IN
voltage_rating120.000 VOLTS NOMINAL
wattage_rating10.000 WATTS
bulb_designatorC-7
features_providedFILAMENT SHIELDING AND HEAT RESISTANT GLASS
rated_average_lifeHOURS
center_hole_diameter0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
filament_designationC-7A A
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-677-9817
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12633-3 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
10C7/DCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
23213InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10C7-5DCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
XM-79665-65L27-10U38-5.1WL316InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
XM-79665-65L27-10U38-5.1OL316InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12633-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12633-3?
12633-3 is a DUMMY CONNECTOR,RECEPTACLE manufactured by Hama.
What parts can replace 12633-3?
There are 5 known substitutes for 12633-3: 10C7/DC, 23213, 10C7-5DC and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12633-3?
12633-3 is cataloged in the Federal Logistics Information System under NSN 5331-00-677-9817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12633-3