PartsTable
Technical Data Sheet
Download PDF

12625762 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12625762: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include overall_length: 3.38 INCHES NOMINAL IN, first_end_style: CHAMFERED, second_hole_diameter: 0.781 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL, end_item_identification: 2590-01-626-9881;PREDETONATION SYSTEM,EXPLOSIVE HAZARD,VE, second_end_relationship_with_first_end: NOT IDENTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-680-3421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12625762
NSN: 5315-01-680-3421
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
overall_length3.38 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_hole_diameter0.781 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
end_item_identification2590-01-626-9881;PREDETONATION SYSTEM,EXPLOSIVE HAZARD,VE
second_end_relationship_with_first_endNOT IDENTICAL
center_to_center_distance_between_holes1.75 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCYLINDER PIN WELDMENT
NSN5315-01-680-3421
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12625762 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.75 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END STYLECHAMFERED
OVERALL LENGTH3.38 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND HOLE DIAMETER0.781 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES1.75 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCYLINDER PIN WELDMENT
END ITEM IDENTIFICATION2590-01-626-9881;PREDETONATION SYSTEM,EXPLOSIVE HAZARD,VE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12625762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12625762?
12625762 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 12625762?
12625762 is cataloged in the U.S. Government catalog under NSN 5315-01-680-3421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12625762