PartsTable
Technical Data Sheet
Download PDF

1262-062 ITEM 1 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1262-062 ITEM 1: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.498 INCHES MINIMUM AND 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM IN, overall_length: 1.900 INCHES NOMINAL1.900 INCHES NOMINAL IN, undercut_width: 0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN, first_end_style: CHAMFEREDCHAMFERED, effective_length: 1.528 INCHES NOMINAL1.528 INCHES NOMINAL IN, style_designator: GROOVEGROOVE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-355-1938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1262-062 ITEM 1
NSN: 5315-01-355-1938
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 36334 — INDAL TECHNOLOGIES INC (CAN)
SPECIFICATIONS
diameter0.498 INCHES MINIMUM AND 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM IN
overall_length1.900 INCHES NOMINAL1.900 INCHES NOMINAL IN
undercut_width0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
first_end_styleCHAMFEREDCHAMFERED
effective_length1.528 INCHES NOMINAL1.528 INCHES NOMINAL IN
style_designatorGROOVEGROOVE
undercut_diameter0.466 INCHES MINIMUM AND 0.466 INCHES MINIMUM AND 0.469 INCHES MAXIMUM0.469 INCHES MAXIMUM IN
first_end_locationBOTH ENDSBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
second_undercut_width0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
first_end_taper_length0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICALIDENTICAL
NSN5315-01-355-1938
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1262-062 ITEM 1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.466 INCHES MINIMUM AND 0.466 INCHES MINIMUM AND 0.469 INCHES MAXIMUM0.469 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDSBOTH ENDS
•
FIRST END STYLE: CHAMFEREDCHAMFERED
•
STYLE DESIGNATOR: GROOVEGROOVE
•
DIAMETER: 0.498 INCHES MINIMUM AND 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
UNDERCUT DIAMETER0.466 INCHES MINIMUM AND 0.466 INCHES MINIMUM AND 0.469 INCHES MAXIMUM0.469 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDSBOTH ENDS
FIRST END STYLECHAMFEREDCHAMFERED
STYLE DESIGNATORGROOVEGROOVE
DIAMETER0.498 INCHES MINIMUM AND 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM IN
OVERALL LENGTH1.900 INCHES NOMINAL1.900 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICALIDENTICAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
1262-021 ITEM 14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1262-062 ITEM 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1262-062 ITEM 1?
1262-062 ITEM 1 is a PIN,GROOVED,HEADLESS.
What parts can replace 1262-062 ITEM 1?
There is 1 known substitute for 1262-062 ITEM 1: 1262-021 ITEM 14. Substitute compatibility should be verified for your specific system.
What is the NSN for 1262-062 ITEM 1?
1262-062 ITEM 1 is cataloged in the U.S. Government catalog under NSN 5315-01-355-1938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1262-062 ITEM 1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.