PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 126190
126190 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The LINING,FRICTION is a the manufacturer industrial component. Key specifications include end_item_identification: PILING SYSTEM ON ELEVATOR CAUSEWAY SYSTEM (ELCAS), part_name_assigned_by_controlling_agency: EXTERNAL PILE GRIPPER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-6190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
126190
NSN: 5305-00-012-6190
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
end_item_identificationPILING SYSTEM ON ELEVATOR CAUSEWAY SYSTEM (ELCAS)
part_name_assigned_by_controlling_agencyEXTERNAL PILE GRIPPER
NSN5305-00-012-6190
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 126190 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2S STYLE
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
FASTENER LENGTH0.375 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2S STYLE
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLESLOT
FEATURES PROVIDEDCASEHARDENED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
116338Interchangeable
interchangeable cross-reference
interchangeable
522095Interchangeable
interchangeable cross-reference
interchangeable
FFS107TYPEASTYLE2SInterchangeable
interchangeable cross-reference
interchangeable
126190Interchangeable
interchangeable cross-reference
interchangeable
6304321 FIND NO.12Interchangeable
interchangeable cross-reference
interchangeable
6304321Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 126190?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 126190?
126190 is a LINING,FRICTION.
What parts can replace 126190?
There are 7 known substitutes for 126190: 116338, 522095, FFS107TYPEASTYLE2S and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 126190?
126190 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-6190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 126190

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026