PartsTable
Technical Data Sheet
Download PDF

12606720 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12606720: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL, hole_diameter: 0.328 INCHES NOMINAL ALL HOLES IN, overall_width: 3.75 INCHES NOMINAL IN, aperture_width: 2.85 INCHES NOMINAL IN, overall_length: 4.75 INCHES NOMINAL IN, aperture_length: 3.85 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-678-2053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12606720
NSN: 5330-01-678-2053
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
hole_diameter0.328 INCHES NOMINAL ALL HOLES IN
overall_width3.75 INCHES NOMINAL IN
aperture_width2.85 INCHES NOMINAL IN
overall_length4.75 INCHES NOMINAL IN
aperture_length3.85 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity4
end_item_identification2320-01-652-5208
cross-sectional_thickness0.065 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
part_name_assigned_by_controlling_agencyGASKET,FLANGE T LATCH
NSN5330-01-678-2053
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12606720 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.065 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 2.85 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.85 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.065 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH4.75 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.75 INCHES NOMINAL IN
APERTURE WIDTH2.85 INCHES NOMINAL IN
APERTURE LENGTH3.85 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET,FLANGE T LATCH
END ITEM IDENTIFICATION2320-01-652-5208
SUBSTITUTES & CROSS-REFERENCES 1
9015-14Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12606720?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12606720?
12606720 is a GASKET.
What parts can replace 12606720?
There is 1 known substitute for 12606720: 9015-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 12606720?
12606720 is cataloged in the U.S. Government catalog under NSN 5330-01-678-2053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12606720