PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12604244-144
12604244-144 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BAND, overall_width: 1.656 INCHES NOMINAL IN, loop_inside_diameter: 1.000 INCHES NOMINAL IN, cushioning_environmental_protection: FUEL, AROMATIC AND HEAT AND OIL RESISTANT, distance_from_loop_center_to_tongue_end: 0.656 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-126-0611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12604244-144
NSN: 5340-01-126-0611
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BAND
overall_width1.656 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
cushioning_environmental_protectionFUEL, AROMATIC AND HEAT AND OIL RESISTANT
distance_from_loop_center_to_tongue_end0.656 INCHES NOMINAL IN
NSN5340-01-126-0611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12604244-144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND HEAT AND OIL RESISTANT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.656 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING BAND
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC AND HEAT AND OIL RESISTANT
DISTANCE FROM LOOP CENTER TO TONGUE END0.656 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
OVERALL WIDTH1.656 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
MATERIALRUBBER SYNTHETIC CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
500P-.125 DIA NInterchangeable
interchangeable cross-reference
interchangeable
101-125Interchangeable
interchangeable cross-reference
interchangeable
8215930Interchangeable
interchangeable cross-reference
interchangeable
CT24AInterchangeable
interchangeable cross-reference
interchangeable
CT24CInterchangeable
interchangeable cross-reference
interchangeable
100-3912Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12604244-144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12604244-144?
12604244-144 is a CLAMP,LOOP.
What parts can replace 12604244-144?
There are 9 known substitutes for 12604244-144: 500P-.125 DIA N, 101-125, 8215930 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12604244-144?
12604244-144 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-126-0611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12604244-144

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026