PartsTable
Technical Data Sheet
Download PDF

126032 — INTERFACE UNIT,DATA TRANSFER

✓ Government record, cited
Hama · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

126032: INTERFACE UNIT,DATA TRANSFER.

- Plastic frame with a brushed aluminium appearance - Precision mitre - High-quality glass - You can have the frame standing up or hang it on the wall. Key specifications include material: STEEL OVERALL, nut_style: WING, unit_design: DESK TOP AND PORTABLE, thread_class: 2B, body_diameter: 0.688 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-6032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 126032
NSN: 5310-00-012-6032
NIINs: 000126032, 015483920, 016695310
FSC: 5310 — Nuts and Washers
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleWING
unit_designDESK TOP AND PORTABLE
thread_class2B
body_diameter0.688 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height0.719 INCHES NOMINAL IN
special_featuresUNIVERSAL DIAGNOSTIC PC TO VEHICLE INTERFACE; COMPATIBLE WITH RP1210A OEM DIAGNOSTIC SOFTWARE; PC PARALLEL PORT INTERFACE; OPERATATES ON 12 AND 24 VOLT SYSTEMS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
wing_spread_width1.375 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
NSN5310-00-012-6032
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 126032 Hama NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 126032 MFR Hama
KEY FEATURES
•
BODY DIAMETER: 0.688 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NUT STYLE: WING
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.688 INCHES NOMINAL IN
OVERALL HEIGHT0.719 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NUT STYLEWING
THREAD CLASS2B
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
707H1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 126032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 126032?
126032 is a INTERFACE UNIT,DATA TRANSFER manufactured by Hama. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 126032?
There is 1 known substitute for 126032: 707H1. Substitute compatibility should be verified for your specific system.
What is the NSN for 126032?
126032 is cataloged in the U.S. Government catalog under NSN 5310-00-012-6032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 126032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.