PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12601650
12601650 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC NYLON OVERALL, overall_width: 0.36 INCHES NOMINAL IN, overall_length: 1.06 INCHES NOMINAL IN, inside_diameter: 0.50 INCHES NOMINAL IN, material_thickness: 0.16 INCHES NOMINAL IN, end_item_identification: 2320-01-652-5208. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-671-7918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12601650
NSN: 5340-01-671-7918
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC NYLON OVERALL
overall_width0.36 INCHES NOMINAL IN
overall_length1.06 INCHES NOMINAL IN
inside_diameter0.50 INCHES NOMINAL IN
material_thickness0.16 INCHES NOMINAL IN
end_item_identification2320-01-652-5208
part_name_assigned_by_controlling_agencyCLIP, SPL .50 NY PUSH
NSN5340-01-671-7918
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12601650 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.50 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.16 INCHES NOMINAL IN
•
MATERIAL: PLASTIC NYLON OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP, SPL .50 NY PUSH
INSIDE DIAMETER0.50 INCHES NOMINAL IN
MATERIAL THICKNESS0.16 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320-01-652-5208
OVERALL WIDTH0.36 INCHES NOMINAL IN
OVERALL LENGTH1.06 INCHES NOMINAL IN
MATERIALPLASTIC NYLON OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
1239N2Upgraded Successor
successor cross-reference
successor
2146061Upgraded Successor
successor cross-reference
successor
281791Upgraded Successor
successor cross-reference
successor
14531Interchangeable
interchangeable cross-reference
interchangeable
87-0502Interchangeable
interchangeable cross-reference
interchangeable
107403Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12601650?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12601650?
12601650 is a CLAMP,LOOP.
What parts can replace 12601650?
There are 16 known substitutes for 12601650: 1239N2, 2146061, 281791 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12601650?
12601650 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-671-7918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12601650

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026