PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12601108
12601108 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GRIP,HANDLE is a the manufacturer industrial component. Key specifications include overall_length: 3.600 INCHES MINIMUM AND 4.400 INCHES MAXIMUM IN, inside_diameter: 0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), outside_diameter: 1.500 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, gripping_surface_condition: GRIP AID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-177-0040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12601108
NSN: 5340-01-177-0040
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
overall_length3.600 INCHES MINIMUM AND 4.400 INCHES MAXIMUM IN
inside_diameter0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
outside_diameter1.500 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
gripping_surface_conditionGRIP AID
NSN5340-01-177-0040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12601108 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
OUTSIDE DIAMETER: 1.500 INCHES MAXIMUM IN
•
GRIPPING SURFACE CONDITION: GRIP AID
•
STYLE DESIGNATOR: CYLINDRICAL
•
INSIDE DIAMETER: 0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.600 INCHES MINIMUM AND 4.400 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
OUTSIDE DIAMETER1.500 INCHES MAXIMUM IN
GRIPPING SURFACE CONDITIONGRIP AID
STYLE DESIGNATORCYLINDRICAL
INSIDE DIAMETER0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
695-6Interchangeable
interchangeable cross-reference
interchangeable
69561Interchangeable
interchangeable cross-reference
interchangeable
81431W1ITEM2Interchangeable
interchangeable cross-reference
interchangeable
76879W1ITEM4Interchangeable
interchangeable cross-reference
interchangeable
44057Interchangeable
interchangeable cross-reference
interchangeable
SA5802-834Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12601108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12601108?
12601108 is a GRIP,HANDLE.
What parts can replace 12601108?
There are 17 known substitutes for 12601108: 695-6, 69561, 81431W1ITEM2 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12601108?
12601108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-177-0040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12601108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026