PartsTable
Technical Data Sheet
Download PDF

12601036 — NUT,PLAIN,WING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12601036: NUT,PLAIN,WING.

The NUT,PLAIN,WING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: WING, thread_class: 2B, body_diameter: 0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, overall_height: 0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-671-5521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12601036
NSN: 5310-01-671-5521
FSC: 5310 — Nuts and Washers
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleWING
thread_class2B
body_diameter0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
overall_height0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
wing_spread_width0.970 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
end_item_identification2320-01-652-5218
thread_quantity_per_inch32
surface_treatment_document_and_classificationASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-671-5521
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12601036 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY DIAMETER: 0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT STYLE: WING
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OVERALL HEIGHT0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEWING
THREAD CLASS2B
END ITEM IDENTIFICATION2320-01-652-5218
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
70908Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12601036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12601036?
12601036 is a NUT,PLAIN,WING.
What parts can replace 12601036?
There is 1 known substitute for 12601036: 70908. Substitute compatibility should be verified for your specific system.
What is the NSN for 12601036?
12601036 is cataloged in the U.S. Government catalog under NSN 5310-01-671-5521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12601036