PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12592429
12592429 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL, shank_length: 0.880 INCHES NOMINAL IN, overall_height: 3.590 INCHES NOMINAL IN, shank_diameter: 1.125 INCHES NOMINAL IN, special_features: MATERIAL ALSO INCLUDES STEEL;FLAT ON TWO SIDES OF BUMPER, style_designator: ROUND TOP FLANGE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-342-6903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12592429
NSN: 5340-01-342-6903
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialRUBBER NATURAL
shank_length0.880 INCHES NOMINAL IN
overall_height3.590 INCHES NOMINAL IN
shank_diameter1.125 INCHES NOMINAL IN
special_featuresMATERIAL ALSO INCLUDES STEEL;FLAT ON TWO SIDES OF BUMPER
style_designatorROUND TOP FLANGE
end_item_identificationM119A1 HOW
outside/top_flange_diameter3.000 INCHES NOMINAL IN
NSN5340-01-342-6903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12592429 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND TOP FLANGE
•
MATERIAL: RUBBER NATURAL
•
SHANK DIAMETER: 1.125 INCHES NOMINAL IN
•
SHANK LENGTH: 0.880 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORROUND TOP FLANGE
MATERIALRUBBER NATURAL
OVERALL HEIGHT3.590 INCHES NOMINAL IN
SHANK DIAMETER1.125 INCHES NOMINAL IN
SHANK LENGTH0.880 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER3.000 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL ALSO INCLUDES STEEL;FLAT ON TWO SIDES OF BUMPER
END ITEM IDENTIFICATIONM119A1 HOW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1002199-P3Interchangeable
interchangeable cross-reference
interchangeable
K-24780Interchangeable
interchangeable cross-reference
interchangeable
912160Interchangeable
interchangeable cross-reference
interchangeable
15683Interchangeable
interchangeable cross-reference
interchangeable
8848-100Interchangeable
interchangeable cross-reference
interchangeable
600-59144-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12592429?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12592429?
12592429 is a WIRING HARNESS,BRANCHED.
What parts can replace 12592429?
There are 10 known substitutes for 12592429: 1002199-P3, K-24780, 912160 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12592429?
12592429 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-342-6903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12592429

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026