PartsTable
Technical Data Sheet
PartsTable / MRO / 125816
125816 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Exclusive wooden frame in a modern design <br>- Incl. premium glass, antireflex coating on one side <br>- Float glass quality, ground and washed <br>- Precision mitre <br>- Back with a heavy-duty hook This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-251-0520, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 125816
NSN: 5330-00-251-0520
FSC: 5330
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
Part Number125816
ManufacturerHama
NSN5330-00-251-0520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125816 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 8.938 INCHES NOMINAL IN
•
OUTER GROOVE SMALLEST WIDTH: 0.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 8.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
OUTER GROOVE DEPTH: 0.156 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
OUTER GROOVE WIDTH: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER8.938 INCHES NOMINAL IN
OUTER GROOVE SMALLEST WIDTH0.125 INCHES NOMINAL IN
CENTER HOLE DIAMETER8.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
OUTER GROOVE DEPTH0.156 INCHES NOMINAL IN
INNER GROOVE WIDTH0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
OUTER GROOVE WIDTH0.156 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
300-108Interchangeable
interchangeable cross-reference
interchangeable
125816Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125816?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125816?
125816 is a BAR,MOUNTING manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 125816?
There are 2 known substitutes for 125816: 300-108, 125816. Substitute compatibility should be verified for your specific system.
What is the NSN for 125816?
125816 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-251-0520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125816

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026